Ocr - Socket D760 Programming Manual

OCR

Make sure the scanner is not connected to a host computer or device before scanning a command
barcode.
To enable or disable OCR-A, scan one of the following barcodes.
Enable OCR-A
Disable OCR-A (default)
OCR-A Variant
Font variant sets a processing algorithm and default character subset for the given font. To choose a
variant, scan one of the following barcodes. Selecting the most appropriate font variant optimizes
performance and accuracy.
Note: Enable OCR-A before setting this parameter. If disabling OCR-A, set the variant to its default
(OCR-A Full ASCII).
OCR-A Full ASCII (default)
supports the following characters:
!"#$()*+,-./0123456789<>ABCDEFGHIJKLMNOPQRSTUVWXYZ\^
15