Alcatel OneTouch Go Play Repair Document page 53

L2 Repair Document
 press front casing with casing press jig:
Before assembling screws, use casing press jig to press front casing as shown in below picture.
(Pressure parameter: 0.3Mpa; Time: 8s);
 Press the front casing/frame with jig in oder to make speaker foam adhere to PCBA well.
Step2. Function pre-test (MMI test)
 After assembling screws on the front casing, please take one TP/LCD module and connect
the FPC with main PCBA (DO NOT assemble the TP/LCD adhesive) ; then proceed with function test
(MMI *#2886# test refer to 2.3) .
Connect TP/LCD
FPC with main
PCBA
 Assemble screws:
I.
II.
Rev.
1.3
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
assemble 15 screws on front casing;
Assemble 2 screws besides USB connector.
Go Play 7048X_A Level 2 Repair Document
TCL
Communication Ltd.
No need to
assemble the
TP/LCD adhesive
Page
53/95