L2 Repair Document
Clean the foam tape from TP and Frame:
The foam tape can be removed soon after TP disassembly by heated, and if some glue remained on
TP or frame, you can use the alcohol for clean, but pay attention for not use much for TP, suggest just use
slightly wet soft cloth to clean the TP part, avoid to impact LCD part.
Step3, Extract the SIM tray and SD tray;
Step4: Remove the USB connector Screw
There is UV glue on the 2 screws. Apply hot air
remove the UV glue from hole with tweezers
connector screw by using screw driver,
Rev.
1.3
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
(Be Carefully for
Go Play 7048X_A Level 2 Repair Document
TCL
(temp:100℃,
time:15s) on the screws and then
safety), then remove the USB
Communication Ltd.
Page
32/95