L2 Repair Document
APPENDIX 1 Packaging Requirements
1.
Any L3 PCBA which has appearance like below cases is not acceptable.
1) The PCBA which shielding cover is rusty or distortion, copper peel off;
2) Smudge on PCBA, such as soldering flux, rudimental glue, handwriting, burn, scratch and so
on ;
Rev.
1.3
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
×
×
×
Go Play 7048X_A Level 2 Repair Document
TCL
×
Communication Ltd.
Page
90/95