Alcatel OneTouch Go Play Repair Document page 49

L2 Repair Document
Attention:
Step1. Assemble the unit ( except TP/LCD module )
Please pay attention to some point during the re-assembly process:
 Rubber for sub MIC:
Please ensure the location and not be distorted after PCBA reassembled
 Please make sure USB O ring(PN: BNF287416410) is well assemble:
(Note: it may cause air leak problem here if without the O ring)
 USB connector assembly:
 Remember to paste Battery connector PET after battery assembled:
Rev.
1.3
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
Go Play 7048X_A Level 2 Repair Document
TCL
Communication Ltd.
Page
49/95