L2 Repair Document
II. Press "Pass" to continue.
Accessory
I.
Insert headset according to the instruction and you will hear a voice prompt which
introduces some emergency call numbers through the headset left if it functions well;
II.
Press "Pass" to continue;
III. You will hear a voice prompt which introduces some emergency call numbers through the
headset right if it functions well;
IV. Press "Pass" to continue;
V. Make a noise near the headset's mic and you will hear it from headset if it functions well;
VI. Remove the headset then it will pass the test automatically
FM
I. Insert headset,you will hear FM playing and FM frequency will be displayed on the screen
if it functions well;
II. Press "Pass" to continue;
III. Remove headset according to instruction and it will display "Remove headset OK." if it
functions well;
IV. Press "Pass" to continue.
Charging & USB
I. Insert USB cable according to instruction, it will detect it and say "Charger: OK; USB: OK" if
it functions well;
Rev.
1.3
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
Go Play 7048X_A Level 2 Repair Document
TCL
Communication Ltd.
Page
13/95