Alcatel OneTouch Go Play Repair Document page 29

L2 Repair Document
Step 2: TP/LCD module disassembly:
Use hot wind gun to heat touch lens along with the four edges (hot wind gun temperature: 130 ,
Air Level: 3, Height: around 10mm, Time: about 30s). And then separate TP/LCD module with plastic
flake and suction cup.
Please note the flake should not too deep under TP/LCD module, avoid damaging the TP/LCD.
Rev.
1.3
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
Go Play 7048X_A Level 2 Repair Document
TCL
Communication Ltd.
Audio jack cover
USB connector
cover
℃
Page
29/95