Motors And Blades; Replacing Food Compartment; Fan Motors And Blades - Hussmann microSC GSVM A Series Installation & Operation Manual

P/N 3109358_B

REPLACING FOOD COMPARTMENT

FAN MOTORS AND BLADES

For access to these fans:
1 . Remove product and place in a refrigerated
area . Turn off power to the merchandiser .
2 . Make sure there is no voltage in the
refrigerator .
3 . Remove step shelf in order to access the
evaporator .
4 . Disconnect evaporator fan motor harness
for each motor .
5 . Remove screws (3 on each side, 6 total) to
remove evaporator cover Fig A
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
Figure A. Remove screws attaching cover to fan plenum.
Figure B. Screws attaching plenum bracket to fan assembly.
6 . Once evaporator cover is removed, remove
plenum / fan assembly .
7 . Remove evap . fan motor screws (4 x motor)
to get motor / blade assy . (Fig B) . In total
we have 8 screws to releases 2 motors .
8 . Change the failed part .
9 . If the only damaged part is the motor,
remove blade .
10 . Reverse the process and make sure
everything is in place .
GSVM-A Open Vertical Merchandisers
5-3