Load Limits; Stocking; Solar Thermometer - Hussmann microSC GSVM A Series Installation & Operation Manual

3-8
startup

LOAD LIMITS

Each merchandiser has a load limit decal . Shelf
life of perishables will be short if load limit is
violated .
A
t no time should merchAndisers be
stocked beyond the loAd limits indicAted
d
o not block Air louvers

STOCKING

Product should NOT be placed inside the
merchandisers until merchandisers are at
proper operating temperature .
Allow merchandiser 24 hours to operate before
loading product.
P/N 3109358_B
/
operation
.
U.S. & Canada 1-800-922-1919 • Mexico 01 800-890-2900 • www.hussmann.com
Product will be degraded and may spoil if
allowed to sit in a non-refrigerated area.
Proper rotation of product during stocking is
.
necessary to prevent product loss . Always
bring the oldest product to the front and set
the newest to the back .
A
ir dischArge And return flues must
remAin open And free of obstruction At
to provide proper refrigeration and
All times
air curtain performance . Do not allow prod-
uct, packages, signs, etc . to block these grilles .
Do not use non-approved shelving, baskets,
display racks, or any accessory that could
hamper air curtain performance .
Do not allow product to be placed outside of
the designated load limits in the illustration at
left . Air flows through the back wall, over the
product on the shelves, across the face of the
product (air curtain), and into the return air
grille .

SOLAR THERMOMETER

GSVM-A models have solar thermometers .
The thermometer is located at the top, front
center of the merchandiser's cabinet interior .
Temperature is displayed in Fahrenheit
degrees as a standard option . Celsius is also
an available option . The thermometer may be
replaced if it becomes damaged .
To replace: remove the two screws securing the
thermometer to its mounting bracket . Remove
the sensing element from the clip, and install
the new thermometer in reverse order .