Sunny Health & Fitness SF-RB4958 User Manual page 8

We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY
(877-907-8669).
#4 d8*Φ20*1.5 4PCS
#27 M8*16 4PCS
13
12
10
11
27
4
27
12
#15 d5*Φ20*1.5*R30 1PC
#16 M5*50 1PC
#85 M5*10 2PCS
13
12
16
10
15
14
11
#B S6
4
13
27
13
9
8
9
1
#A S13-14-15
85
86
14
10
STEP 3:
Insert the Tension Wire (No. 10) into the Front
Post (No. 11) and take out the Tension Wire
(No. 10) from the hole on the side of Front
Post (No. 11).
Connect Sensor Wire 1 (No. 8) with Sensor
Wire 2 (No. 12). Connect Handle Pulse Wire
1 (No. 9) with Handle Pulse Wire 2 (No. 13).
Attach Front Post (No. 11) to Main Frame
12
(No. 1) using 4 Screws (No. 27) and 4
Washers (No. 4). Tighten and secure with
8
Allen Wrench (No. B).
STEP 4:
Remove the Bolt (No. 16) and Arc Washer
(No. 15) from Tension Control Knob (No. 14)
with Spanner (No. A).
CAUTION:
Control Knob (No. 14) is at the lowest
resistance level (level 1, all the way to the left)
before you connect Tension Wire (No. 10).
Connect the link wire of Tension Control
Knob (No. 14) with Tension Wire (No. 10).
Then, pull the link wire of Tension Control
Knob (No. 14) upward and insert it into the slot
of metal bracket of Tension Wire (No. 10).
Make sure the metal fitting on the link wire of
Tension Control Knob (No. 14) is secured in
the metal bracket.
Attach Tension Control Knob (No. 14) to the
Front Post (No. 11) with the Bolt (No. 16) and
Arc Washer (No. 15) that were removed.
Tighten and secure with Spanner (No. A).
Remove 2 Crosshead Screws (No. 85) from
Front Post (No. 11) with Spanner (No. A).
Attach Water Bottle Holder (No. 86) onto
Front Post (No. 11) using 2 Crosshead
Screws (No. 85) that were removed. Tighten
and secure with Spanner (No. A).
7
Please make sure Tension