Sunny Health & Fitness SF-RB4958 User Manual page 12

ADJUSTMENTS & USAGE GUIDE
33
14
6L/R
6L/R
CLEANING
The recumbent bike can be cleaned with a soft, clean, damp cloth. Do not use abrasives or
solvents on plastic parts. Please wipe your perspiration off the recumbent bike after each use. Be
careful not to get excessive moisture on the computer display panel as this might cause electrical
hazard or electronics to fail.
Please keep the recumbent bike, especially the computer, out of direct sunlight to prevent screen
damage.
Please inspect all assembly bolts and pedals on the recumbent bike for proper tightness every
week.
STORAGE
Store the recumbent bike a clean and dry environment, away from children.
ADJUSTING THE BALANCE
In order to achieve a smooth and comfortable ride, you must
ensure that the recumbent bike is stable and secured. If you
notice that the recumbent bike is unbalanced during use, you
should adjust the End Caps (No. 33) located on the rear
stabilizer until the recumbent bike becomes levelled with the
surface.
ADJUSTING THE TENSION
Adjust the tension by rotating the Tension Control Knob
(No. 14) clockwise to increase the level of resistance. Rotate
the Tension Control Knob (No. 14) counter-clockwise to
decrease the level of resistance.
Tension levels are set at Level 1 being the lowest and Level
8 being the highest.
MOVING THE RECUMBENT BIKE
To move the recumbent bike, hold Rear Stabilizer (No. 32)
and tilt the recumbent bike until the movable wheels on the
5
Left & Right End Caps (No. 6L/R) located on the front
32
stabilizer touch the ground. With the wheels on the ground,
you can transport the recumbent bike to the desired location
with ease.
ADJUSTING THE SEAT
To adjust the seat forward or backwards, press down Brake
Handle (No. 44), then slide the seat to the desired position.
Lift the Brake Handle (No. 44) up to tighten.
11