Assembly; Make Assembly Easier - WEIDER CLUB C725 User Manual

ASSEMBLY

Make Assembly Easier

Everything in this manual is designed to ensure
that the weight bench can be assembled suc-
cessfully by almost anyone. By setting aside
plenty of time, assembly will go smoothly.
Before beginning assembly, carefully read the fol-
lowing information and instructions:
• To hire an authorized service technician to
assemble the weight bench, call 1-800-445-2480.
• Assembly requires two persons. Some steps may
require three persons.
• Because of its size, the weight bench should be
assembled in the location where it will be used.
Make sure that there is enough clearance to walk
around the weight bench as you assemble it.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
1.
Before beginning assembly, read the impor-
tant information in the box above. See the
PART IDENTIFICATION CHART on pages 5
and 6 for help identifying small parts.
Note: Remove all hex keys from the hardware
kit for the rack.
Attach the Rear Stabilizer (2) to the Bench
Frame (1) with two M10 x 95mm Bolts (144), two
M10 Washers (83), and two M10 Nylon Locknuts
(116). Do not tighten the Nylon Locknuts yet.
• For help identifying small parts, use the PART
IDENTIFICATION CHART on pages 5 and 6.
• As you assemble the weight bench, make sure all
parts are oriented as shown in the drawings.
• Tighten all parts as you assemble them, unless
instructed to do otherwise.
• In addition to the included tools, assembly
requires the following tools (not included):
two adjustable wrenches
one rubber mallet
one standard screwdriver
one Phillips screwdriver
Assembly will be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.
1
116
1
116
7
2
83
144