WEIDER CLUB C725 User Manual page 22

41. Attach an M6 x 48mm Button Bolt (124) and an
M6 Nylon Locknut (150) to the Swivel Bracket
(31) and the Bracket Guard (149) as shown.
Make sure that the High Cable (81) is between
the Button Bolt and the Small Pulley (74).
Next, wrap the High Cable (81) around a Small
Pulley (74). Attach the Small Pulley inside the Top
Frame (17) with an M10 x 70mm Button Bolt (97),
an M10 Washer (83), and a 25mm Spacer (121).
Press a Top Frame Cap (127) into the Top Frame
(17).
42. Wrap the High Cable (81) around a Small Pulley
(74). Attach the Small Pulley to the indicated
bracket on the Weight Carriage Frame (18) with
an M10 x 45mm Button Bolt (131) and an M10
Nylon Locknut (116).
43. Wrap the High Cable (81) over a Small Pulley
(74). Attach the Small Pulley and a Small Cable
Trap (93) to the Weight Carriage Frame (18) with
an M10 x 125mm Button Bolt (141), an M10
Washer (83), and an M10 Nylon Locknut (116).
Do not tighten the Nylon Locknut yet. Make
sure that the Small Cable Trap is oriented to
hold the Cable in the groove of the Small
Pulley.
41
127
17
124
31
74
149
150
81
42
Bracket
43
141
22
97
83
121
74
81
131
74
81 18
116
83
93
18
74
81
116