Advertisement
Installation Reference
Installing the Outdoor Optical Splitter
1
Loosen the hex socket screws.
4 mm hex key
3
Optional: wall-mounting
3.2 Install expansion bolts.
Chisel drilling positions.
Bull-point chisel
Install expansion bolts.
Nut
Flat washer
Expansion
tube
Expansion
bolt
48/49 >>
2
Open the case cover.
Cable distribution area
Hole blocks
Drill holes.
Ф8 drill bit
Remove the nut.
Optional: wall-mounting
3
3.1 Use a scribe template to determine the positions of mounting holes and use a scribe pen to mark
them.
Level
Fiber routing
clips
Fiber fixing
holes
Scribe
template
Mounting
hole
3.3 Tighten the screws and fix the case.
Scribe pen
Flat washer
Expansion bolt
Nut
Advertisement
