Advertisement
Installation Reference
Installing the Outdoor Optical Splitter
4
Optional: pole-mounting
4.1 Install the pole assembly on the pole.
Loosen the screw on the hold hoop.
Install the pole assembly on the pole.
Hold hoop
Assembly
Tighten the
screw on the
hold hoop.
Route in and fix cables.
5
Determine the holes through which fibers are routed in and remove the hole blocks.
Connected to the
Connected to the fiber outlet
fiber outlet on the
on the main RTN 380e
standby RTN 380e
50/51 >>
Complete installation of the pole
assembly.
Hole blocks
Connected to the fiber outlet
on the customer equipment
4.2 Fix the case on the pole assembly and tighten the lower hold hoop.
Fix the upper end of the case and then
Tighten the
the lower end.
hold hoop.
Partially
tighten the
hold hoop.
Fix hose clamps on
outdoor fibers.
Hooks to
fix hose
clamps
Outdoor fiber trough
Tighten the
hold hoop.
Hose
clamp
Advertisement
