Advertisement
Installation Reference
Installing the Indoor PI
Optional: Installing the PI on a Wall
1
Fix the floating nuts.
Mounting ears for
installation on a wall
3
Install the PI on the wall.
Big flat
washer
Nut
Small flat washer
M6x60
expansion bolt
44/45 >>
2
Mark and drill holes in the wall.
Hold the PI up to the wall and mark the drilling positions. Drill the holes and insert the fixing bolts.
The position of the holes should allow a heat dissipation space of at least 50 mm at both the top
and bottom of the PI.
≥ 300 mm
Drilling
positions
4
Install the PGND cable.
PGND
cable
Install the PGND cable with
the ground screw (M6).
M6
1.4±0.14 N· m
Drill Ф8 holes to a
depth of 52 to 60 mm.
8
Advertisement
