Advertisement
Installation Reference
Loading NE Data
Ports within the
RSSI/NMS
maintenance
maintenance
compartment
compartment
Connected to the Web LCT
Connected to the USB flash drive
Open the RSSI/NMS maintenance compartment.
Optional: Insert the USB flash drive into the USB port.
Check the USB port status indicator.
After data is loaded from the USB flash drive to the
RTN 380e, the USB port status indicator in the
USB/RSSI/NMS port should be on (green).
Optional: Connect the computer where the Web LCT is
installed to the RJ45 port.
Close and screw the maintenance compartment.
NOTE
The USB flash drive loads software, system parameters, and scripts for commissioning
a newly deployed equipment.
For the functions, working principles, and types of USB flash drives supported, see the
Product Description.
For a description of the indicator on the USB flash drive, see the Commissioning and
Configuration Guide.
62/63 >>
Installing the WLAN Module
Ports within the
RSSI/NMS
maintenance
maintenance
compartment
compartment
WLAN module
1
Open the RSSI/NMS maintenance compartment.
2
Insert the WLAN module into the USB port.
Optional: Connect the Web LCT to the equipment through WLAN.
NOTE
For information about how to connect the Web LCT to the equipment through WLAN,
see the Commissioning and Configuration Guide.
Close and screw the maintenance compartment.
Advertisement
