Checking Electronics - Vetter Smartfork Operating Instructions Manual

n Function check for fork arm locking device:
– The SmartFork
– The SmartFork
n The SmartFork
Both SmartFork
n
n The SmartFork
edges.
n Function check for the connection cable:
– All plug connections must be securely plugged in.
– The cables must not have any damage, cracks or kinks.
n Depending on the configuration, the Laser, Level, Distance, Flash and Secure applica-
tions must be clean and undamaged.
n The safety markings must be complete and legible.
6.2.2

Checking electronics

Personnel:
Protective equipment:
Check the electronic components of the SmartFork
Check all applications separately for proper functionality. In the event of insufficient
n
functionality, immediately ban further use of the SmartFork
may only be carried out after a successful repair.
n Check that all exposed components are seated securely. Components must not be
installed in such a way that they are loose or insecure. Fix loosened components back
in place properly, replace missing screws etc.
n Check all plug connections on the electronic components. Plugs must be plugged in
securely and be free of play. Retighten loose plug connections. Replace the plug con-
nection if this is not possible.
n Check the cables for damage, cracks or kinks. Replace damaged cables immediately.
Commissioning may only be carried out after a successful repair.
V1.02/2020
®
Scale must be engaged in the locking groove (Fig. 13/2).
®
Scale lever must be fully engaged.
®
Scale must be free from dirt and ice.
® Scale hooks must not have any damage.
® Scale must not have any deformations, cracks, damage or sharp
WARNING!
Risk of injury from loss of functionality!
Malfunctions or damage to the SmartFork
loss of functionality or failure of the assistance system. This could result
in dangerous situations and serious injuries.
– In the event of damage, malfunctions or uncertainty, take the
®
SmartFork Scale out of operation immediately. Contact customer
Ä "Customer service" on page 3 or a service specialist and
service
inform them of the issue.
n Electrician
n Protective clothing
n Industrial safety helmet
n Protective gloves
n Safety shoes
®
SmartFork Scale weighing fork arms
Maintenance of the SmartFork
Maintenance activities > Checking electronics
®
assistance system lead to a
® applications:
®
® Scale
Scale. Commissioning
37
EN