Cabling - Vetter Smartfork Operating Instructions Manual

3.4

Cabling

Personnel:
Protective equipment:
Cable connec-
tion of the
SmartSupply
variant BAT
Fig. 7: Cable connections, variant BAT
V1.02/2020
n Electrician
n Industrial safety helmet
Protective clothing
n
n Protective gloves
n Safety shoes
NOTICE!
Incorrect cabling!
Incorrect cabling could lead to damage and the failure of the SmartFork
applications. This could cause serious injuries.
Always observe the following points:
– Always lay the cables with enough play (e.g. loops) to avoid mechan-
ical abrasion.
– Do not guide cables over sharp edges.
– Do not lay cables near hot locations.
– Always secure the cable routing.
All information on correct cabling for the SmartFork
installed upon delivery can be found in the other applicable documents.
®
SmartFork Scale weighing fork arms
Structure of the SmartFork
®
applications
® Scale
Cabling
EN
®
25