SLM 1530 Index Safety Requirements Symbols and Safety Labels Overview Introducing the SLM 1530 Key Features General Specifications Technical Specifications Description of Equipment Components 8 Connectors and Controls Keyboard Power Supply About Battery Product Operation 1. Channel Info 2. Spectrum 3.
(12VDC - 2A). Contact Information - Ensure that the voltage applied to the power connector does not exceed 15V. Higher voltages For support, service and repair, contact Sencore could damage the equipment ProCare at +1-605-978-4600 or email - Maximun consumpted current: 2A procare@sencore.com.
Quick and easy to use interface with features The SLM 1530 is a light weight, rugged unit, such as Channel measurements, System Scans, packed with all the features needed to install and Constellation Diagram, Spectrum Analyzer, troubleshoot a television system using ATSC 1.0,...
SLM 1530 General Specifications Display 2.8” TFT 400 x 240 full color Weight 510g (12.12lb) Dimensions 175 x 100 x 52 mm / 6.9 x 3.9 x 2 in (H x W x D) Input: 100-240V~ 50-60Hz Power Source Output: 12VDC, 2A Battery LiIon smart battery (7.2VDC, 2600mAh)
Technical Specifications Up to 40dB Constellation Frequency Constellation Range 5-1002 MHz (depending on the function) Analog Measurements Resolution 10 kHz Tuning Freq. Range Frequency or channel 42-1002MHz Input Level -35 to +60 dBmV Impedance 75Ω F-type connector Up to 45dB Spectrum Analyzer Features Freq.
SLM 1530 Description of equipment Keyboard components Connectors and controls Device On/Off button: To turn the equipment off, press and hold for approximately 3 seconds. Back button: Return to the previous menu or close a parameter entry window. 1. External power connector (12VDC).
Power supply From a fully discharged state, a full charge takes A DC adapter is provided to power and charge the approximately 8 hours and a 3 hour charge will meter. Plug the adapter into a properly grounded provide approximately a 75% charge. electrical supply and the power connector on the The charge management system will detect side of the unit.
Due to the accuracy and level of detail provided by Channel this spectrum analyzer, the SLM 1530 is the ideal Channel Change using Frequency tool for identifying and locating noise, interference,...
2.2. Setup 3. MPEG Press to change Spectrum options. The SLM 1530’s MPEG feature will show the image of the selected service. 3.1. Main window Below is a capture of a MPEG Info window with a brief explanation of its features: Selected channel - Ter.Plan: Selects the channel plan...
SLM 1530 3.2. Setup Measurements Channel of the selected Channel Frequency Change channel plan using Press to change the Channel Info options. with pass/fail indicators - Ter.Plan: Selects the channel plan - ALP Id: Selects the ATSC Link Layer Id Bar graph representing all the found channels.
A bar graph is displayed with the height representing the power for digital channels and the The SLM 1530’s real time constellation, allows the level of the video carrier for the analog channels. installer to assess the size and shape of the build...
SLM 1530 6.2. Setup Selected channel Change using Press to change Constellation options. - Ter.Plan: Selects the channel plan - Powering: Off, 13V, 18V, 24V. - Zoom: OFF, 1 List of measurements with pass/fail indicators Echoes graph Select a quadrant of the constellation to be and number of echoes represented for more detailed view.
DNS. 1530 to the same Wi-Fi network, you can use your mobile device to control your SLM Gateway. 1530. You just have to open a web browser - Wi-Fi: Allows to connect the SLM 1530 to a...
Screen Mirroring function (see section 4 - Screen Mirroring in the Web Application menu) Whenever the SLM 1530 is connected to the MAC: The MAC can be set automatically internet, it will automatically check if there is a or user-selected newer firmware version.
Download/ using the Ethernet connector or the Wi-Fi interface. Change calendar/ remove the Then find the IP of the SLM 1530 (see section 8 - list display mode selected Datalogs Setup - Network/Wi-Fi). Then, type the SLM 1530 IP in the address bar of a web browser and press Enter.
So, the chan- nel plans corresponding to that area will be avail- able in the SLM 1530. But the user may add other standard channel plans corresponding to other geographic areas (this is specially helpful for tho- se places located near the frontier between two areas).
Using this feature, it is very easy to have the same configuration in all your SLM 1530 meters. You only have to export the configuration of the SLM 1530 that you wanto to copy, using the Export feature. The configuration will be saved in a file on you computer.
RF input. It is recommended to If you get the update file from your distributor, check the installation to find out why the short- you can install it in your SLM 1530 by clicking on circuit is produced. “Manually updating firmware”.
Le présent appareil est conforme aux CNR d’ISDE Responsible Party - U.S. Contact Information: applicables aux appareils radio exempts de licence. +1-605-978-4600, procare@sencore.com or L’exploitation est autorisée aux deux conditions www.sencore.com suivantes : (1) L’appareil ne doit pas produire de brouillage, et FCC Compliance Statement (2) L’utilisateur de l’appareil doit accepter tout...
Need help?
Do you have a question about the SLM 1530 and is the answer not in the manual?
Questions and answers