Siemens MQ67185 Operating Instructions Manual page 14

MQ67185_de-kk-ar.book Seite 14 Dienstag, 12. August 2014 11:31 11
en
Place lid on the bowl and turn all the way

anti-clockwise.
If there are larger quantities of ingredients
in the bowl, it may take a little more effort
to attach the lid. If required, turn the three-
winged coupling on the underside of the
lid into the correct position.
Place the base unit on the attachment

and lock into position.
Insert pusher.

Insert the mains plug.

Hold the base unit and universal cutter

firmly and switch on the appliance (turbo
speed).
To add more ingredients, release the

On button. Wait until the tool comes to
a standstill.
Remove the pusher and add ingredients

through the feed tube.
Release the On button after processing.

After using the appliance:
Remove mains plug.

Press the release buttons and remove

the base unit from the attachment.
Turn lid clockwise and remove from the

bowl.
Take hold of the universal blade by the

plastic handle and take out.
Carrier disc with disc inserts
Slicing attachment – coarse
Set speed control to low speed for cutting:
cucumbers, carrots, potatoes.
Slicing attachment – fine
Set speed control to low speed for cutting:
cucumbers, carrots, beetroot, zucchini.
Shredding insert – medium
Set speed control to high speed for
shredding: apples, carrots, cheese, cabbage.
Grating disc insert – coarse
Set speed control to high speed for grating:
potatoes for dumplings, potato pancakes;
fruit and vegetables for raw vegetable salad.
Always observe the maximum quantities and
processing times in the table (Fig.
14
The blade is sharp and can cause
injury!
Exercise particular caution when handling
the attachments! Note shape and location
of the insert when inserting it into the
carrier disc. Take hold of carrier disc by
the designated recessed grips only.
Do not place fingers in the feed tube.
Only use the pusher when adding more
ingredients.
Caution!
The disc inserts must not be used for cutting
very hard foods (Parmesan cheese, choco-
late).
The disc inserts are only partly suitable for
processing fibrous foods (leek, celery,
rhubarb).
Fig. 
Place bowl on a smooth and clean work

surface.
Insert the required insert into the carrier

disc. Note the form and the location
(Fig. 
Take hold of carrier disc by the recessed

grips and insert into the bowl.
Place lid on the bowl and turn all the way

anti-clockwise.
Place the base unit on the attachment

and lock into position.
Insert the mains plug.

Set the required speed with the speed

control.
Hold base unit and multifunction

accessory firmly and switch appliance on.
Put ingredients to be cut or shredded

through the feed tube.
When adding contents which are to be

sliced or shredded, apply only light
pressure to the pusher.
Warning!
Empty the bowl before it becomes so full that
the cutting or grating contents reach the
carrier disc.
 ).
Release the On button after processing.

After using the appliance:
Remove mains plug.

Press the release buttons and remove

the base unit from the attachment.
Turn lid clockwise and remove from the

bowl.
-1)!