Assembling The Dect Phone - Yealink CP930W-Base Quick Start Manual

ASSEMBLING THE DECT PHONE

1. Connect the base station power and the network using method a or method b.
a. AC Power Option
Note:
• If you choose method a, use Yealink-supplied power adapter (5V/600mA). A third-party power adapter
may damage the base station.
If you choose method b, you do not need to connect the power adapter. Make sure the hub/switch is
•
PoE-compliant.
2.A (Desktop Installation) Attach and remove the base stand.
Attach the Base Stand
Align the snap-fits with the corresponding holes
and push forward, snapping them into the holes.
2.B (Wall-Mount Installation) Attach the base station.
DECT Conference Phone – CP930W-Base & CP930W
b. PoE (Power Over Ethernet) Option
Remove the Base Stand
Remove the snap-fits from the
holes horizontally.
4
Quick Start Guide