ASSEMBLING THE DECT PHONE
1. Connect the network and power for the base station in one of the following ways, as shown below:
a. AC Power Option
Note:
If inline power (PoE) is provided, you do not need to connect the power adapter. Make sure the
•
hub/switch is PoE-compliant. The base station should be used with original power adapter
(5V/600mA) only. The use of the third-party power adapter may cause the damage to the base station.
2. Insert the battery into the handset, as shown below:
3. Connect the charger cradle and charge the handset, as shown below:
Note:
•
The handset should be used with original power adapter (5V/600mA) only. The use of the
third-party power adapter may cause the damage to the handset.
•
The charging status of the handset is indicated in the top right-hand corner of the LCD screen.
b. PoE (Power Over Ethernet) Option
IP DECT Phone – W56P & W56H
Quick Start Guide
4