Getting Started; Hardware Overview; Registration - Yealink CP930W-Base Quick Start Manual

GETTING STARTED

HARDWARE OVERVIEW

REGISTRATION

You can register up to 8 CP930W to one W60B base station. Each CP930W can only be registered up to one
base station.
When the CP930W LCD screen prompts "Unregistered!", long press
LED indicator flashes.
There are two methods to register a new CP930W:
Easy Registration:
1. Tap the Reg soft key on the CP930W to register quickly.
Normal Registration:
1. Tap the OK soft key on the CP930W, and then select
2. Select the desired base station and then tap the
The CP930W begins searching the base station.
3. Tap the OK soft key after searching a base station successfully.
4. Enter the base station PIN (default: 0000), and then tap the
registration.
To register to multiple base stations, tap the
then repeat steps 2-4.
Note:
• If the CP930W is registered to the base station successfully, the LCD screen prompts "Handset Subscribed"
and "Base NO." (the "NO. "indicates the last 4 characters of the base station's MAC address).
If the CP930W LCD screen prompts "Searching for Base", check that your base station is powered on.
•
DECT Conference Phone – CP930W-Base & CP930W
on the base station till the registration
Register Handset.
OK soft key.
Done soft key to complete the
Menu->Settings->Registration->Register Handset,
6
Quick Start Guide