USE
new zone
— touch
Changing a zone
•
To change a zone
— select the zone
— touch
•
To change the name
— touch Edit group name
•
To change the composition
— touch Edit group's dev
•
To delete the zone
— touch Remove this group
3.8
Displaying details
The Details menu provides an overview of all
the parameters of all the indoor units con-
nected to the system:
— identification name
— address of the device
— ambient temperature
— operating mode
— purging speed
— temperature of the gas piping
— temperature of the liquid piping
— operating time
— active alarms
•
To access
— touch
•
To reset the values
— touch
— enter the password
— press Ok
9
The operating time is not reset.
26