If You Need Assistance - Technosoft iPOS4808MY Technical Reference

I/o board for ipos4808 my intelligent servo drives

Hide thumbs

Table Of Contents

Table of Contents

instructions. With EasyMotion Studio you can fully benefit from a key advantage of Technosoft

drives – their capability to execute complex motions without requiring an external motion

controller, thanks to their built-in motion controller. A demo version of EasyMotion Studio

(with EasySetUp part fully functional) can be downloaded free of charge from

Technosoft web page

iPOS CANopen Programming (part no. P091.063.iPOS.UM.xxxx) – explains how to program the

iPOS drives using CANopen protocol and describes the associated object dictionaries for the

supported profiles.

CAN application layer over EtherCAT Programming (part no. P091.064.UM.xxxx) – explains

how to program the Technosoft intelligent drives using CoE protocol and describes the

associated object dictionary.

TML_LIB v2.0 (part no. P091.040.v20.UM.xxxx) – explains how to program in C, C++,C#, Visual

Basic or Delphi Pascal a motion application for the Technosoft intelligent drives using

TML_LIB v2.0 motion control library for PCs. The TML_lib includes ready-to-run examples that

can be executed on Windows or Linux (x86 and x64).

TML_LIB_LabVIEW v2.0 (part no. P091.040.LABVIEW.v20.UM.xxxx) – explains how to program

in LabVIEW a motion application for the Technosoft intelligent drives using TML_LIB_Labview

v2.0 motion control library for PCs. The TML_Lib_LabVIEW includes over 40 ready-to-run

examples.

TML_LIB_S7 (part no. P091.040.S7.UM.xxxx) – explains how to program in a PLC Siemens

series S7-300 or S7-400 a motion application for the Technosoft intelligent drives using

TML_LIB_S7 motion control library. The TML_LIB_S7 library is IEC61131-3 compatible.

TML_LIB_CJ1 (part no. P091.040.CJ1.UM.xxxx) – explains how to program in a PLC Omron

series CJ1 a motion application for the Technosoft intelligent drives using TML_LIB_CJ1

motion control library for PCs. The TML_LIB_CJ1 library is IEC61131-3 compatible.

TML_LIB_X20 (part no. P091.040.X20.UM.xxxx) – explains how to program in a B&R PLC series

X20 a motion application for the Technosoft intelligent drives using TML_LIB_X20 motion

control library for PCs. The TML_LIB_X20 library is IEC61131-3 compatible

TechnoCAN (part no. P091.063.TechnoCAN.UM.xxxx) – presents TechnoCAN protocol – an

extension of the CANopen communication profile used for TML commands