Wham - Uniden POLARIS Owner's Manual

UT888ZL (POLARIS)-0805
3-H. WHAM
1. Press and hold MENU for 2 seconds.
2. Press the PUSH – SELECT knob at
SETUP
appear.
3. Rotate the PUSH – SELECT knob to
select
4. Press the PUSH – SELECT knob,
and the following screen will appear.
3-H-1. BASE ID
1. When you press the PUSH –
SELECT knob at
following screen appears and you
can enter the ID.
2. Rotate the PUSH – SELECT knob
clockwise to increase the number,
counterclockwise to decrease. The
number will be entered when the
PUSH – SELECT knob is pressed,
and the blinking digit moves to the
right. You can select the number
0000 to 9999.
3. After the BASE ID is entered, a
confirmation screen appears, and
you can select answer by rotating the
PUSH – SELECT knob, and then
press the PUSH – SELECT.
8/5/02 4:50 PM
, the SETUP menu will

WHAM

.
BASE ID
Page 41
HI
MEM
TELEPHONE
DSC CALL
SYSTEM
SETUP
REV.CH.MEM
EXIT
U.I.C.
DIRECTORY
AUTO.CH.SW
POS.REPLY
CH TAG
WHAM
BASE ID
LINK CH
EXIT
BASE ID
0000
, the
BASE ID
0001
YES
NO
BASE ID
LINK CH
EXIT
41
CAN