Stihl MSA 160 C Instruction Manual page 44

– Control handle: 3.9 m/s²
– Front handle: 4.6 m/s²
The vibration values quoted above have been measured
according to a standardized test procedure and may be used
to compare electric power tools. Depending on the type of
usage, the vibrations that actually occur may differ from the
values quoted. The vibration values quoted may be used for
an initial assessment of the user's exposure to vibrations. The
actual exposure to vibrations has to be estimated. This
process may also take into account times during which the
electric power tool is switched off and times during which it is
switched on but running off load.
20 Bar and Chain Combinations
20.1 STIHL MSA 160 C, MSA 200 C Chainsaws
Pitch Drive link gauge/
groove width
1/4" P 1.1 mm
The cutting length of a guide bar depends on the chainsaw and the saw chain being used. Actual cutting length may be less
than the specified length
0458-701-9921-E
Length Guide Bar
25 cm Rollomatic E Mini
30 cm
35 cm
Information on compliance with Vibration Directive 2002/44/
EC is available at www.stihl.com/vib.
19.6 REACH
REACH is an EC regulation and stands for the Registration,
Evaluation, Authorisation and Restriction of Chemical
substances.
For information on compliance with the REACH regulation
see www.stihl.com/reach.
Nose sprocket No. of drive links Saw chain
teeth
8
English
20 Bar and Chain Combinations
56 71 PM3 (Type 3670)
64
72
81