Set Delay Time - Uniden UBCD996T Owner's Manual

In addition to this scan you can search any of the preprogrammed service or custom
search ranges.
While scanning, press
service or custom search range. Press
System Quick Key to the search to make it easy to quickly enable/disable the search
range for search and scan. The Search with Scan Hold time determines how long
the scanner stays on a search before moving on. The default is 2 seconds. See
Page 95 to change the Search with Scan settings.
Editing a Service Search
You can change the way service search works for each service. There are also two
methods to reach the point of editing.
Method One
g Q
[MENU]
Search for ...
Q g
Edit Service
Q
Select a service range:
Air, CB Radio, UHF CB Radio, Racing, TV Broadcast, FM
Broadcast, Police, Marine, Railroad
Method Two
+ [SCAN/SEARCH]
Quick Search? Yes="E" / No="."
Q
Press
[.No] then
At this point you can edit each of the settings that comprise each custom search
range.
The following show you how to set the various option settings associated with a
Service. For each, your starting operation is
g Q
[MENU] Search for ...
Q g
Edit Service
Q
Select a service range:

Set Delay Time

Q
to select a value from
. Rotate the Scroll Control
[L/O] to unlock it. You can also assign a
g
g
g
g
to
Edit Service
g
, , ,
1 sec 2 sec 3 sec 4 sec 5 sec
96
until you reach the desired
.
, , and .
Off
g