Throughout the balance of this manual you will see a designation such as
on the same line as a heading. This means that the section, in this example, applies
M
otorola, DACS, TR, onventional and EDACS CAT systems.
E
L
Specifying the Correct System Type
In order for trunk tracking to work properly, you have to specify the correct system
type when you create the system. Here are some tips for selecting the correct type:
Use online resources, such as the www.radioreference.com database, to identify the
system type.
Even though a system has digital channels, it is not necessarily a P25 system. To be
P25, the system type must be described as Project 25 (there are many Motorola 800
Standard systems that have some digital channels.
These should be entered as Motorola 800 Standard and not P25).
EDACS Wide is the same as EDAC Standard.
EDACS Networked sites are EDACS Narrow
Following these steps to change the system name.
[MENU]
Program System
Select the system
Edit Name
To enter a letter, turn the
enter a decimal point, press
the cursor to the right, press
To clear a character, press
To accept an entry, press
Programming System Options
Editing the System Quick Key
[MENU]
Program System
Select a conventional system
Edit Sys Option
Set Quick Key
C
Scroll Control
until the character you want appears. To
[.No]
. To move the cursor to the left, press
[6]
.
[.No]
twice. To clear all characters, press
[E
]
or
.
YES
68
MELCS
S
[4]
. To move
[.No]
3 times.
MELCS
C