Uniden UBCD996T Owner's Manual page 75

Adjust the P25 Decode Threshold
[MENU]
Program System
Select a conventional system
Edit Sys Option
Adjust P25 Level
This setting determines some system-specific parameters for digital channels. In
most cases, setting this to
also manually set the digital decode threshold. This setting affects all channels in the
current system. See " Optimizing P25 Performance" on Page52.
— the scanner automatically adjusts the digital decode threshold to match the
Auto
transmission you are hearing when it receives a strong signal and has a high
decode rate.
— lets you manually adjust the digital decode threshold. To manually adjust
Manual
the P25 level, select
Manual
— sets the digital decode threshold to the default value. Use this setting to
Default
return to the value that usually provides adequate performance. This is handy as
you have manually adjusted the value to a setting that prevents proper decoding.
Note: This setting has no effect on how these systems are received.
Editing Sites
Use this option to enter and edit site information for the current system. See "
Programming Sites" on Page76 for instructions for each site option. Note that you
must program at least one site for each trunked system in order for your scanner to
scan the system.
Editing Channel Groups
Use this option to enter and edit channel groups and channel information. See
"Programming Channel Groups" for instructions for each channel group and channel
option. Note that you must program at least one channel group and one channel for
each conventional system in your scanner. You do not have to enter channel group
information for trunked systems, but doing so makes it easier to follow specific talk
groups.
provides the best performance. However, you can
Auto
.
75
C
MESL
MECL