Set Delay Time; Set Attenuator; Set Alert Level - Uniden BCT15 Owner's Manual

[MENU]
Set Bear Tracker
Set Hold Time
Set the hold time, in seconds, between 0 and 255.
Use to change the number position.
If you exceed 255, and press
Out of Range, Set Max? (Y/N)
If you want to use the maximum setting, press
If not, press [.No] to cancel and enter a new number in range.

Set Delay Time

This setting determines how long the scanner remains on channels of a system
after the transmission ends before resumes scanning.
[MENU]
Set Bear Tracker
Set Delay Time
Set the delay time, in seconds, between 1 and 5 and Off.
F
Then press to make your selection.

Set Attenuator

This setting lets you introduce about 20dB attenuation to a strong signal.
[MENU]
Set Bear Tracker
Set Attenuator
to select either On or Off then

Set Alert Level

This setting lets you choose a volume level for the selected Alert Tone.
[MENU]
Set Bear Tracker
Set Alert Level
to select a level between 1 and 15 (loudest) or Auto which matches the volume
of your master volume control.
68
F
F
F
, you see
F
F
F
F
F
to set your selection.
F
F
F
.