Advertisement
As soon as the computer is connected with power supply, an acoustic signal sounds and all of the displays
are shown on LCD for 2 seconds, then showing wheel diameter.
If no button are pressed and the pedals have not been moved for approx. 4 minutes, the
computer will switch to power saving mode. All setting and data will be saved until user
start next training.
DISPLAY & BUTTON FUNCTIONS
Training Values
RPM
TIME
SPEED
DISTANCE
CALORIES
WATT
PULSE
BUTTON
- Increase resistance level
UP
- Function selection
- Decrease resistance level
DOWN
- Function selection
- Confirm setting or selection.
ENTER
- Hold on pressing for 2 seconds, computer will reboot.
- Reset all values to zero.
Reset
- Reverse to main menu after finishing a workout.
-
Start or Stop training.
Start/ Stop
- Track user Heart rate in recovery phase.
Recovery
Acoustic Signals
All settings made with the computer are confirmed with an acoustic signal:
1 shot beep = setting confirmed
Display Range
0~999
-Revolution per minute
0.0 ~ 99:99min.
-User exercising time displaying;
-Setting range 0:00~99:00.
0~99.9km
-User exercising speed.
0~99.99m
-User exercising distance.
- Setting range 0.00~99.90km
0 ~ 9999 Cal.
-Burned calories during exercising.
-Setting range 0~9990
0~999
-Power consumption during exercising.
-Setting range 10~350
30-230 BPM
-User current Heart Rate value.
-Setting range 0-30~230Bpm.
Description/ Setting Range
FUNCTION
17
Advertisement
