Mitsubishi Electric ME96SSH-MB Programming Manual page 3

General Description
This manual describes the programming methods that should be created by the user for monitoring
measurement value of the Electronic Multi-Measuring Instrument (called ME96 from here on) with the
CC-Link (in remote net ver2 mode or remote net additional mode).
In programming, read the following related manuals in addition to this mannual.
CC-Link System Master/Local Module User's Manual
type QJ61BT11N
User's Manual for ME96
NOTICE
When using ME96, Optional Plug-in Module "ME-0040C-SS96" is necessary. CC-Link communication is not
available without the optional plug-in module. In this manual, "ME96SSH-MB", "ME96SSR-MB",
"ME96SSHA-MB", "ME96SSRA-MB", "ME96SSHB-MB" or "ME96SSRB-MB" means the main device of
ME96 with the optional plug-in module.
POINT
The ME96 must be handled after setting of the remote device station version. Set the remote device station
version with the "Setting Menu 2" of the ME96.
Use the following as a guideline in setting the remote device station version and set the version at ME96.
Mode select setting
Ver.1 remote device station
(Ver.1 compatible slave station)
Ver.2 remote device station
(Ver.2 compatible slave station)
This programming manual is for ver.2 remote device station.
For use in the ver.1 remote device station (Ver.1 compatible slave station), refer to the following manual.
・Electronic Multi-Measuring Instrument Programing Manual (CC-Link)(For ver.1 remote device station)
..................................................................................................................................................... LEN080334
Table 1.1 Related Manuals
Manual Name
Select this when utilizing the conventional program, because of
compatibility with ME96NSR.
Select this when configuring a new system or the being newly
added to the existing system in combination with the applicable
master module.
(3/n)
Manual No.
SH-080394E
(13JR64)
Supplied with product
or download.
Guideline for selection
LEN130391B