Unfolding The Stroller; Wheel Installation - ABC Design Turbo 6 S Manual

1. Unfolding the stroller

1. Unfolding the stroller 1. Unfolding the stroller 1. Unfolding the stroller
Pull the handle of the pram (1) upwards until the frame is
locked (2).
WARNING: WARNING: WARNING: WARNING: Please make sure that all locks are closed before
using.

2. Wheel installation

2. Wheel installation 2. Wheel installation 2. Wheel installation
Put the wheels into the fixation until it is locked properly.
For removing the wheels push down the button located on the
axle as shown on the right picture. Now you can easily remove
the wheel from the axle.
Push the wheel block into the frame until it clicks.
Please pay attention that the breaking lever shows to the front
side.
To remove the wheel block, please push the lever
at the wheel block down and pull away the wheel block
from the frame.
page 3