Advertisement
Quick Links
Advertisement
Related Manuals for JUKI AK85C
Summary of Contents for JUKI AK85C
- Page 1 AK85C INSTRUCTION MANUAL...
-
Page 2: Installation
Congratulations on your purchase of a JUKI's window-plate-mounting type Auto lifter. The main features of this device are as follows: 1) Simple installation, 2) Usable in combination with the knee lifter. Please read these instructions to assure long-term satisfactory usage. - Page 3 Remove washer ❺ and nut ❻ from side plate (asm.) ❹ of the device. ❹ ❺ ❻ Install side plate (asm.) ❹ on the sewing machine. At this time, install side plate (asm.) so that the slot in solenoid link ❼ fits over knee lifter horizontal bar pin ❶.
- Page 4 Pass the solenoid cord inside solenoid shaft ❾. ❾ 10. Connect the solenoid connector to connector C for Connector the AK solenoid on the back surface of the control connection diagram box. Auto-lifter Solenoid & LED/TB unit For upgrading Pedal –...
-
Page 5: Specifications
Thread trimmer cam Roller Almost aligned 11. Adjustment of the floating amount of the tension disc No. 2. A. How to check the floating amount of the tension disc No. 2 1. Turn the main shaft until the bottom end face of needle eyelet is almost aligned with the top surface of throat plate.