Troubleshooting - Elation ELAR TRI PAR IP User Instructions

ELAR TRI PAR IP 7 Channel - DMX Values & Functions
Channel Value
1
1 - 255
2
1 - 255
3
1 - 255
4 1 - 255
5
0 - 15
16 - 255
6
0 - 127
128 - 159
160 - 191
192 - 223
224 - 255
7
1 - 255
Elation Architectural - www.elationlighting.com - ELAR TRI PAR IP Instruction Manual Page 13
Function
RED
0% - 100%
GREEN
0% - 100%
BLUE
0% - 100%
COLOR MACROS
PLEASE SEE CHANNEL 1 MODE
STROBING/PROGRAM SPEED
OFF
SLOW - FAST
PROGRAMS
OFF
COLOR MIXING
3 COLOR CHANGE
7 COLOR CHANGE
SOUND ACTIVE
MASTER DIMMER
0% - 100%
ELAR TRI PAR IP
Due to fog residue, smoke, and dust cleaning the internal and exter-
nal optical lenses must be carried out periodically to optimize light
output.
1. Use normal glass cleaner and a soft cloth to wipe down the
outside casing.
2. Clean the external optics with glass cleaner and a soft cloth
every 20 days.
3. Always be sure to dry all parts completely before plugging
the unit back in.
Cleaning frequency depends on the environment in which the fixture
operates (i.e. smoke, fog residue, dust, dew).
ELAR TRI PAR IP
Listed below are a few common problems the user may encounter,
with solutions.
Unit not responding to DMX:
1. Check that the DMX cables are connected properly and are
wired correctly (pin 3 is "hot"; on some other DMX devices
pin 2 may be 'hot'). Also, check that all cables are connected
to the right connectors; it does matter which way the inputs
and outputs are connected.
Unit does not respond to sound:
1. Quiet or high pitched sounds will not activate the unit.
Elation Architectural - www.elationlighting.com - ELAR TRI PAR IP Instruction Manual Page 14
Cleaning
Trouble Shooting