Chain Dialing; Editing A Stored Name And/Or Phone Number - Uniden WXI377 Owner's Manual

Chain Dialing

The memory locations on the handset are not limited to phone numbers. You can
also store a group of numbers (up to 20 digits) that you need to enter once your
call connects. This is referred to as Chain Dialing.
An example of this is a bank account number. Once you have called your bank,
and are prompted to enter the account number, simply press mem and the location
number where the special number has been stored.
Store your special number with an identifying name. (Refer to "Storing Phone
Numbers and Names" on page 23.)

Editing a Stored Name and/or Phone Number

1) Press and hold mem until "
2) Press vol/+ or vol/-, or enter a number (0 - 9) to select the
memory location you would like to edit.
3) Press select.
The following screen appears with the memory location
number that you have selected in the display.
4) Press vol/+ or vol/- to select "
press select. The following screen appears. The cursor
flashes indicating that the display is ready for the name to
be edited. When a name has not been stored, the cursor
appears at the beginning of the second line.
www.uniden.com
" is displayed.
", then
M E M O R Y D I A L I N G [ 27 ]