Chain Dialing; Finding A Lost Handset - Uniden XDECT 7015 Owner's Manual

Phonebook menu options
Open the phonebook with the phone in standby, then press
to open the phonebook menu. Choose one of these options:
sElECT
Create Add an entry to your phonebook. The phone prompts you to enter
New the name and phone number, and choose a personal ring.
Copy the whole phonebook to another handset. (You must have at
Copy All
least two handsets to use this feature.)
Delete Erase all the entries in this handset's phonebook. (This does not
All affect the entries saved on any other handsets.)
Phonebook entry options
With the phone in standby, open the phonebook and find the entry
you want. Press
menu. Choose one of these options:
Edit this entry. The phone prompts you to edit the name and phone
Edit
number, and choose a personal ring.
Copy this entry to another handset. (You must have at least two
Copy
handsets to use this feature.)
Delete Erase this entry.

Chain Dialing

If you often have to enter a series of digits or a code number

during a call, you can save that code number to a phonebook
entry and use the phonebook to send the code number.
Enter the code number (up to 20 digits1 into the phonebook just

like a regular phonebook entry. Be sure to enter the code number
into the phonebook exactly as you would enter it during a call.
 When you hear the prompt that tells you to enter the number, open
the phonebook and find the entry that contains your code number.
Press
MENU/sElECT
mind, use
pHoNEbook/lEfT

Finding a Lost Handset

With the phone in standby, press
handsets will beep for 1 minute, or until you press
or any key on the handset.
14
to open the individual phonebook entry
MENU/sElECT
to transmit the code. Or, if you change your
to close the phonebook.
on the base. All the
fIND HANDsET
MENU/
again
fIND HANDsET