Troubleshooting - Uniden WXI377 Owner's Manual

Troubleshooting

If your phone is not performing to your expectations, please try these simple steps first.
Symptom
The charge/in use LED won't
illuminate when the handset
is placed in the base.
The audio sounds weak
and/or scratchy.
Can't make or receive calls.
www.uniden.com
• Make sure the AC adapter is plugged into the base and wall outlet.
• Make sure the handset is properly seated in the base.
• Make sure that the handset and base are clean.
• If your handset was submerged in water, water remaining in and
around the speaker and microphone may distort sound. Shake any
water off of the handset, then wipe the handset dry.
• Move the handset and/or base to a different location away from metal
objects or appliances and try again.
• Press delete/ch to help eliminate background noise.
• Make sure that you are not too far from the base.
• Check both ends of the base telephone line cord.
• Make sure the AC adapter is plugged into the base and wall outlet.
• Disconnect the AC adapter for a few minutes, then reconnect it.
• Change the digital security code (see page 37).
• Make sure that you are not too far from the base.
Suggestion
A D D I T I O N A L I N F O R M A T I O N [ 39 ]