Step 1 Checking the Package Contents Make sure you have received the following items in the package. If any of these items are missing or damaged, contact the Uniden Parts Department. Note: Your handset comes with the battery already connected. You must activate the handset.
Viewing the Caller ID Message List Deleting Information from the Caller ID List Using the Caller ID List Additional Information Changing the Digital Security Code Installing the Beltclip Note on Power Sources Maintenance Troubleshooting General Information Precautions & Warranty I.C. Notice Index www.uniden.com...
Welcome Congratulations on your purchase of the Uniden WXI377. This cordless phone is designed and engineered to exacting standards for reliability, long life, and outstanding performance. Note: Some illustrations in this manual may differ from the actual unit for •...
Page 7
C O N T R O L S A N D F U N C T I O N S 20. Base antenna 21. Charge/in use LED 22. Find handset key 23. Telephone line jack 24. DC IN 9V jack...
C. Connect the base unit Choose a central location Avoid noise sources such as a window by a street with heavy traffic Avoid microwave ovens Avoid excessive moisture, extremely low temperatures, dust, mechanical vibration, or shock Avoid personal computers Avoid other cordless telephones www.uniden.com...
Page 9
(Use only the supplied AC adapter. Do not use any other AC adapter.) • Check to see if the handset is sitting correctly in the base. www.uniden.com • Use only the Uniden (BT-909) rechargeable battery pack supplied with your cordless telephone.
Page 10
By inserting bottom first, place the battery cover back on the handset and tighten the 3 screws. [ 10 ] G E T T I N G S T A R T E D Rubber Seal www.uniden.com...
If the rubber seal appears warn, nicked, or dried out, replacement seals are available through the Uniden Parts Department. If you have questions regarding installation of battery pack and/or rubber seal, please call our Customer Hotline at 1-800-297-1023. Battery use time (per charge) From fully charged (15-20 hours charge time) •...
[ 12 ] G E T T I N G S T A R T E D If your telephone outlet isn't modular, contact your telephone company for assistance. Route the cord. Modular www.uniden.com...
6) Align the mounting slots on the base with the mounting posts on the wall. Then push in and down until the phone is firmly seated. www.uniden.com DO NOT use an AC outlet controlled by a wall switch.
Allow about 1/8 of an inch between the wall and screw heads for mounting the phone. 2) Refer to steps 1 through 6 on page 13 to mount the telephone. [ 14 ] G E T T I N G S T A R T E D www.uniden.com...
Press select to toggle between “ 3) Press end and return the handset to the base unit to complete the setting. The handset returns to the standby mode. www.uniden.com ” and “ ” for AutoTalk and CIDCW. The cordless phone...
Page 16
A confirmation tone sounds. To complete the setting, press end or return the handset to the base unit. [ 16 ] G E T T I N G S T A R T E D option, your local area ”. /tone/ t t or delete/ch delete/ch and www.uniden.com...
• If your phone system requires pulse dialing and you need to send the DTMF tones for certain situations during a call, you may “switch-over” to tone dialing. (Refer to “Tone Dialing Switch-over” on page 21.) www.uniden.com ”. ” and “...
Setting the language 1) When the phone is in the standby mode, press and hold cid/menu. The following screen appears. 2) Press 5 or the vol/- key four times to select “ 3) Press select to toggle between “ (French) for each setting. 4) Press end or return the handset to the base unit to complete the setting.
3) Listen for the dial tone. 4) Press redial/p. To redial 1) Pick up the handset. 2) Press redial/p, then press talk/flash. www.uniden.com Handset Off Base Press talk/flash, any number, /tone/ t or #/ s (AutoTalk). 1) Press talk/flash. 2) Listen for the dial tone.
The redial/p key redials the last number dialed. The redialed number can be up to 32 digits long. [ 20 ] B A S I C S vol/+ in Maximum mode or vol/- in Low mode, an error tone sounds. www.uniden.com...
During a call, as you begin to move your handset too far from your base unit, noise increases. If you pass the range limits of the base unit, your call will terminate within 5 minutes. www.uniden.com • The tone feature only applies when the dial mode is set to pulse.
To return to the original caller, press talk/flash again. You must subscribe through your local telephone company to receive Call Waiting Service. [ 22 ] B A S I C S ” appears on the display, indicating the phone www.uniden.com...
• Use delete/ch to delete characters as needed. • Press and hold delete/ch to delete all the characters. • If a name is not required, go to step 5. www.uniden.com ” is displayed. • In memory dialing operation, you must...
Page 24
Repeat steps 2 - 7 to store more numbers. 8) Press end to return to the standby mode. [ 24 ] M E M O R Y D I A L I N G ” is displayed. /tone/ t or #/ s to enter the ”. www.uniden.com...
9) Press 7 eight times. 10) When finished, press select. To continue to store the telephone number, proceed to step 6 on page 24. www.uniden.com ” is displayed. See page 27 for information on Number of times key is pressed keys...
When a name has not been stored, the cursor appears at the beginning of the second line. www.uniden.com ” is displayed. ”, then M E M O R Y D I A L I N G...
Page 28
9) Press end to return to the standby mode. [ 28 ] M E M O R Y D I A L I N G /tone/ t , #/ s , or delete/ch to edit the name. /tone/ t , #/ s , or delete/ch to ”. www.uniden.com...
8) After about 2 seconds, the display returns to the “ ” screen. You may delete the information in another memory location (return to step 2) or press end to return to standby mode. www.uniden.com ” is displayed. ”. ”.
Making Calls with the RocketDial When the phone is in the standby mode, simply press RocketDial. The number stored in the RocketDial memory location is instantly dialed. [ 30 ] R O C K E T D I A L ”, then www.uniden.com...
5) Press select or delete/ch. You hear a confirmation tone, and the following display appears. After about 2 seconds, the handset returns to standby mode. www.uniden.com ”. ”. R O C K E T D I A L [ 31 ]...
[ 32 ] C A L L E R I D F E A T U R E S The date and time received Caller's name Caller's phone number “Incomplete Data” “Private Name” “Private Number” “Unknown Name” “Unknown Number” www.uniden.com...
3) Press the vol/- key to see the next message. Or press the vol/+ key to see the previous message. 4) Press end to return to the standby mode. www.uniden.com ”. (AutoTalk feature • In Caller ID operation, if no key is pressed for...
The display returns to the Caller ID message. Deleting all Caller ID names/numbers 1) Press cid/menu. 2) Press delete/ch. [ 34 ] C A L L E R I D F E A T U R E S ” or “ ”. ”: ”: www.uniden.com...
Pressing 1 while the incoming Caller ID information is displayed (in step 1) will place the prefix “ ” in the display to set up for a long distance call. Pressing 3 will set or cancel an area code setting. www.uniden.com ” or “ ”.
Press the The display returns to the Caller ID list. [ 36 ] C A L L E R I D F E A T U R E S vol/+ key to select “ ”. Press select to overwrite. www.uniden.com...
Insert the beltclip into the holes on each side of the handset. Press down until it clicks. To remove the beltclip Pull both sides of the beltclip to release the tabs from the holes. www.uniden.com • To protect you against misbilled calls which...
Uniden Parts Department for a replacement battery. Warning: To avoid the risk of personal injury or property damage from fire or electrical shock, only use the Uniden battery model and Uniden adapter model specifically designated for this product. Power Failure During the period that the power is off, you will not be able to make or receive calls with the telephone.
The audio sounds weak and/or scratchy. Can't make or receive calls. www.uniden.com Suggestion • Make sure the AC adapter is plugged into the base and wall outlet. • Make sure the handset is properly seated in the base.
Page 40
• The handset was picked up before the second ring. • The call was placed through a switchboard. • Call your local telephone company to verify your Caller ID service is current. • Charge the handset. • Call our customer hotline at 1-800-297-1023. Suggestion www.uniden.com...
DO NOT use a microwave oven to speed up the drying process. This will cause permanent damage to the handset, base and the microwave oven. After following these steps, if your cordless telephone does not work, please send to: Uniden America Corporation Parts and Service Division 4700 Amon Carter Blvd.
With normal usage, the battery should last about one year. A replacement Uniden adapter and battery may be purchased at your local Uniden dealer or by contacting the Uniden Parts Department (800) 554-3988. Hours are from 8:00 a.m. to 5:00 p.m. Central Time, Monday through Friday.
Rechargeable Nickel-Metal-Hydride Batteries Must Be Recycled or Disposed of Properly Uniden works to reduce lead content in our PVC coated cords in our product and accessories. WARNING: The cords on this products and/or...
WARRANTOR: UNIDEN AMERICA CORPORATION (“Uniden”) ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the original retail owner, this Uniden Product to be free from defects in materials and craftsmanship with only the limitations or exclusions set out below. WARRANTY DURATION: This warranty to the original user shall terminate and be of no further effect 12 months after the date of original retail sale.
(2) this device must accept any interference, including interference that may cause undesired operation of the device. “Privacy of communications may not be ensured when using this telephone”. www.uniden.com A D D I T I O N A L I N F O R M A T I O N...
Ringer tone and volume ... 20 RocketDial ... 30 Setting menu options ... 15 Setting up the handset ... 9 Setting up the phone ... 8 T, U, V, W, X, Y, Z Technical information ... 42 Troubleshooting ... 39 Warranty ... 44 www.uniden.com...
1-800-297-1023 PLEASE DO NOT RETURN THIS PRODUCT TO THE PLACE OF PURCHASE. Our Uniden representatives will be happy to help you with any matters regarding the operation of this unit, available accessories, or any other related matters. Thank you for purchasing a Uniden product.
Need help?
Do you have a question about the WXI377 and is the answer not in the manual?
Questions and answers