Uniden WXI377 Owner's Manual page 16

Entering Your Area Code
If you enter a 3-digit area code number in the
code does not appear in Caller ID messages. Do not program this option if your
calling area requires 10-digit dialing. When reviewing Caller ID messages, you will
see only the local seven digit number. For calls received from outside your local area
code, you will see a full 10-digit number.
1) When the phone is in the standby mode, press and hold
2) Press 3 or the vol/- key twice to select "
3) Press select.
4) Use the number keys (0 - 9), #/ s s ,
5) Press select. A confirmation tone sounds and the displayed area code is entered.
6) Press end or return the handset to the base unit to complete the setting.
[ 16 ] G E T T I N G S T A R T E D
cid/menu. The Caller ID setting screen appears.
to enter the 3-digit area code.
The handset returns to the standby mode.
When the area code has already been stored in memory, the stored
area code will be displayed. To change it, use the
number keys to enter the new area code. Then press select.
A confirmation tone sounds. To complete the setting, press end or
return the handset to the base unit.
".
/tone/ t t or delete/ch
*
delete/ch and
option, your local area
www.uniden.com