5) Use the number keys,
6) Press select. The following screen appears.
7) Use the number key, redial/p,
8) Press select. You hear a confirmation tone, and the
9) Press end to return to the standby mode.
[ 28 ]
M E M O R Y D I A L I N G
(See page 23.)
To edit only the phone number, skip this step.
The cursor flashes indicating that the display is ready for the
number to be edited.
edit the phone number. The phone number cannot exceed 20 digits.
(See page 24.)
If you don´t want to change the phone number, skip this step.
following screen appears. The memory storage is complete.
For example, if you store a name and number into memory
location number 1, the display shows "
After about 2 seconds, the display returns to the select
memory screen.
/tone/ t , #/ s , or delete/ch to edit the name.
*
/tone/ t , #/ s , or delete/ch to
*
".
www.uniden.com