Installation - SAL VB X200 Instruction Manual

Main characteristics
• Multifunctional 4,1" (10,4 cm) TFT LCD screen • Changeable color button backlight • Radio/music/photo/video playback • Wireless BT connection • 2in1: built-in and clip-on
external microphone • Calling without touching the phone • Telephone conversations on the car speakers • USB/microSD device is connectable • 30 storage spaces with AM/FM
radio RDS functions • Receiving road informational broadcasts • Displaying the name of the radio station • Searching alternative frequencies for better reception • High/deep and EQ
• Rear view camera and A/V inputs • Automatic rear view camera functions (option: SA 143) • Rear monitor option for passengers • 5-language menu (EN/HU/SK/RO/SRB) • 4 x 50 W Hi-Fi
speaker output • 3,5 mm AUX input for portable devices • 2+1 x RCA amplifier+active subwoofer output • 2+1 x RCA video input and video output

INSTALLATION

CONTROL BUTTONS, CONNECTORS
figure 1.
1. MIC built-in microphone for calling
2. IR the receiver of the remote control
3. SELECTOR volume / settings / approval
4. PWR / MOD on-off / operation modes / end call
5. scroll backward / quick search
9
6. MENU operation modes
7. DISPLAY 4.1" colorful TFT LCD screen
8. 1 / 1 / play and pause
9. 2 / INT 2 / song intro
Resetting the device
It is necessary to delete the microprocessor data after every event when powerline connection has
been interrupted or the device malfunctions. To do this, press the RESET button in the hole above the
USB socket for 3 seconds with a thin, pointed object. The device switches off and returns to the factory
default setting. This operation is required after installation, even before the first switch-on, and when
the battery is replaced in the device.
Switching on and off
When switched off – in case of correct connection – the correct time and date can be seen on the
display. These data can be set manually, but automatically set when listening to appropriate FM RDS
radio station. Press the MOD button to switch on the device. It switches to RADIO mode after the first
switch on.
• Later on, it will automatically switch to the most recently used function after being switched on unless the
external storage device has been removed in the meantime.
• Since voltage surges can occur when the vehicle's engine is started, only turn on the unit after the engine
has been started. Turn off the unit before stopping the engine. To turn off the unit, press the MODE button for
2 seconds.(pressing it shortly results operating in mode change)
Adjusting volume
Use the rotary knob to set the desired volume.
• As the rotary knob is multifunctional, if the unit is in any particular setting mode, you will need to exit
the mode first.
• Volume level is visible in the upper right corner. VOL: 00 - 40
Default settings, select the desired language
Press the MENU button, use the rotary knob to select the SETTINGS function, then press the rotary
knob. The settings menu appears. The following parameters can be set: menu language, date, punctual
time, image format, factory default setting, 12/24 hour format, geographic location of use, brightness,
image sharpness, color saturation, warning in case of video playback, backlight color, software update.
You can select the desired function by rotating the rotary knob, you can modify it after pressing the
rotary knob. After setting the proper data by rotation, you can fix the parameter and proceed to the next
parameter by pressing the button repeatedly.
• For scrolling, you can use 9 : buttons as well, instead of the rotary knob.
• You can exit from „settings" menu with the MENU button.
• Attention! This screen is not a touch screen!
Language: press the rotary knob while standing on the top line, then rotate it until you can see the
desired language, then press it again for fixing (GB / HU / SK / RO / SRB)
Date: select the first, "month" data with the rotary knob while standing on the second line, then press
the rotary knob and set by rotating it. By pressing and rotating again, the "day", then the "year" can be set.
Punctual time: in the third line, the clock can be set by a similar method as the date.
PAL/NTSC: selecting image format standard, recommended: PAL
Factory default setting: by selecting this line and confirming with the rotary knob "YES") then pressing
it, the factory default values can be reset.
Clock mode: you can choose to operate with 12-hour clock (AM/PM – forenoon/afternoon) or 24-hour
display.
Radio reception area: check if the Europe setting is active.
Brightness: set it according to your needs
Contrast: setting image sharpness
Color saturation: set it according to your needs
LED backlight: selecting the color of the buttons: AUTO (changing) / white / purple / turquoise / yellow
/ red / blue / green
Software update: select it only if the manufacturer provides it later
Selecting the data source
There are two ways to select the signal source you want to listen to or watch:
A., Keep pressing the MOD button, until you find the signal source you are looking for (radio, USB/
microSD music player, wireless BT connection (music playback from mobile phone and calling), external
audio-video signal source (rear view camera, AUX audio input)
B., It can be selected from the menu with the help of the MENU button and the rotary knob. With this
10. 3 / RPT 3 / MP3 repeat
11. microSD TF/microSD card socket
12. USB USB socket
13. 4 / RDM 4 / MP3 in random order
14. 5 / -10 5 / x10 song back
15. 6 / +10 5 / x10 song forward
16. scroll forward / quick search
:
17. BND / AMS waveband / station search / answer call
18. AUX 3,5 mm stereo audio input
method, the „settings" menu point is also available.
• The desired signal source cannot be activated, it is not available. For example data source is not connected,
where the adequate files are available (songs, photos, films). Or if the mobile phone has not paired, and
then the BT functions don't work.
• Being switched on again, playing of last listened track will continue, if the connected device has not been
removed in the meantime.
• If there is external unit connected to USB and microSD slot at the same time, then the selected one can
be activated with the MENU button and the rotary knob. Basically the use of microSD slot is recommended,
because of the secure and protected location of it.
• After connecting external data sources, tracks from the last inserted one will played.
• Information about the currently active device is visible in the upper left corner of the display.
Audio settings, EQ
Press briefly the rotary knob for several times and select the parameter to be set: BAS / TRE / BAL / FAD
/ EQ / LOUD / SUB / ST / BEEP / LOC. The setting can be adjusted by rotating, then pressing the fixing
button again. Not all settings are available in all modes.
• If there is no setting made within 3 seconds, the device will automatically switch back to the previous
function.
• Normally the rotary knob adjusts the volume, the extent of which you can see on the upper right corner.
• When listening at high volume, do not set the bass and treble too high, as this may lead to distortion!
• EQ function will clear the pre-set bass and treble settings.
VOLUME
BASS
TREBLE
BALANCE
FADER
EQUALIZATION
LOUDNESS
SUBWOOFER
STEREO
BEEP
LOCAL
Physiological equalization (LOUDNESS)
The human ear senses the low and high frequency sounds less at a lower volume. By activating the LOUD
function at lower volume, this effect is corrected by automatic equalization. It is recommended to switch
it off at a higher volume, because it may cause distorted sounding.
• Before using this function, it is recommended to set the EQ OFF setting and set the equalizers to „0"
position.
• The larger the volume is, the less effect of automatic tone-correction can be felt.
USING THE RADIO
After switching on, the radio will sound if you have previously listened to it – or in the meantime you
have removed the last listened to USB/microSD/BT signal source.
If necessary, use the MOD button or the MENU and the rotary knob to select the radio function.
Manual tuning and storing of radio stations
Select the FM-1 band by pressing the BND/AMS shortly. You can check this on the screen. Press briefly
the 9: buttons to manually tune the radio station you are looking for. Tuning stops at the next radio
station, during SCAN sign can be read under the frequency. The radio station can be stored to the desired
program position by keeping pressed one of the 1-6 buttons for 2 seconds. To fine tune, press and hold
9
car radio & multimedia player
figure 2.
1. ANT IN
2. VIDEO OUT
3. CAMERA IN
4. LINE OUT R
5. LINE OUT L
6. M4
7. ISO IN / OUT
8. FUSE
9. VIDEO INPUT
10. SUB OUT
volume-control (00 – 40)
deep tone-control (-7...0...+7)
high tone-control (-7...0...+7)
left and right channel volume equalizer (L10...0...R10)
volume equalizer for front and rear channels (R10...0...F10)
sounding settings (OFF / CLASSIC / ROCK / POP)
physiological tone setting (LOUD OFF / LOUD ON)
switching on an output for active subwoofer (ON / OFF)
stereo reception switching on- and off at FM radio
switching on and off sound signals
selecting local / long distance reception for radio
VB X200
DIN standard antenna socket
video output for external monitor
video input for rear view camera
amplifier output
amplifier output
M4 screw thread for fastening
ISO power supply & speaker sockets
15A fuse
video input, e.g. TV tuner, DVD
active subwoofer output