Important Safety Instructions - TechniSat DIGITRADIO 220 Instruction Manual

Dab/dab+ and fm radio
Table of Contents

Advertisement

Important Safety Instructions

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS SPEAKER TO RAIN OR MOISTURE.
To reduce the risk of electrical shock, fire, etc.:
1.
Do not place unit near any heat source such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
2.
Do not block any ventilation openings of unit.
3.
The unit shall not be exposed to dripping or splashing and no objects filled with liquids,
such as vases, shall be placed on the unit.
4.
Do not place any heavy loads onto the unit, and do not step on it, the load may fall and
cause serious injury to the unit.
5.
Please read Rating Labels at the back of unit for power input and other safety
information.
6.
This unit is intended to be used only with the power supply provided.
7.
Protect the power cord from being walked on or pinched particularly at the plugs,
convenience receptacles, and at any point where they exit from the unit.
8.
Never unplug your unit by pulling on the power cord. Always grasp the plug firmly and
pull straight out from the outlet.
9.
Repair or replace all electric service cords that have become frayed or otherwise
damaged immediately. Do not use a cord that shows cracks or abrasion damage along
its length, the plug, or the connector end.
10. To prevent fire or shock hazard, do not use this plug with an extension cord or other
outlet unless the blades can be fully inserted to prevent blade exposure.
11. To prevent fire or shock hazard, do not expose unit to rain or moisture.
12. During lightning or raining days, unplug the unit for additional protection during
thunderstorms or when the unit is not used for prolonged periods. This will prevent
damage to the unit from lightning and power surges.
13. Do not attempt to carry out any service work yourself. By opening or removing the
cabinet, you may be exposed to dangerous voltage or other hazards. Any service work
should be carried out by qualified technicians.
14. The normal function of the product may be disturbed by strong Electro-Magnetic
Interference. If so, simply reset the product to resume normal operation by following the
2
1. Read these instructions.
2. Keep these Instructions.
3. Heed all Warnings.
4. Follow all instructions.
5. Do not use the speaker near water.
6. Clean only with dry cloth.

Advertisement

Table of Contents
loading

Table of Contents