Terminal Maintenance Commands; Help Or ?" Command - FreeFlight ADS-B FDL-978 Series Installation Manual

3.5.2 Terminal Maintenance Commands

The available maintenance commands are summarized in the table below:
Command
ads
bit
clear
comm
control
cnfg
gps
help or ?
info
Reset
resetpw
rxstatus
set <item> <value>
setpw
stop
cnfg defaults

3.5.2.1 "help or ?" Command

This command displays a list of available commands as shown below:
FFS Copyright © 2016 All rights reserved.
Description
Display data from the altitude/air data input
Display built-in test status
Clear the terminal screen
Display communication ports' status - continuous
Display control squawk and mode status
Display configuration data
Display data from the GPS input
Display command help
Display info – S/N, operation hours, versions, etc.
Reset and restart the unit
Disable MPI access password (See Section 3.5.3)
Display receiver status info – continuous
Set a configuration item's value
Set MPI access password (See Section 3.5.3)
Stop continuous data outputs
Reset configuration to defaults
ADS-B FDL-978 Series and
Lite Series Installation Manual
Document No. 87343 Rev G
3-23