All Installations - Fisher EZL Instruction Manual

Pressure reducing regulator for low pressure applications
Table of Contents

Advertisement

Type EZL
January 2008
Type EZL Working Monitor
P590 SERIES
PILOT SUPPLY
FILTER
INLET PRESSURE
E0946
OUTLET PRESSURE
INLET PRESSURE
LOADING PRESSURE
OUTLET PRESSURE
INTERMEDIATE PRESSURE
ATMOSPHERIC PRESSURE
LOADING PRESSURE
INTERMEDIATE PRESSURE
ATMOSPHERIC PRESSURE
Installation
!
Personal injury or equipment damage,
due to bursting of pressure-containing
parts may result if this regulator is
overpressured or is installed where
service conditions could exceed the limits
given in the Specification section and
on the appropriate nameplate, or where
conditions exceed any rating of the
adjacent piping or piping connections.
To avoid such injury or damage, provide
pressure-relieving or pressure-limiting
devices to prevent service conditions
from exceeding those limits. Also, be sure
the installation is in compliance with all
applicable codes and regulations.
Additionally, physical damage to the
regulator could break the pilot off the
main valve, causing personal injury and
6
TYPE 161EBM
MONITOR PILOT
TYPE 6352 PILOT
TYPE EZL MAIN VALVE
Figure 5. Working Monitoring System Operational Schematic
WARNING
TYPE 6352 PILOT
P590 SERIES PILOT
SUPPLY FILTER
TYPE EZL MAIN VALVE
property damage due to bursting of
pressure-containing parts. To avoid such
injury and damage, install the regulator in
a safe location.

All Installations

A Type EZL regulator bleeds no gas to atmosphere
during normal operation, thus making the regulator
suitable for installation in pits and other enclosed
locations without elaborate venting systems. This
regulator also can be installed in pits subject to flooding
by venting the pilot spring case above the expected
flood level so that the pilot setting can be referenced to
atmospheric pressure.
1. Only personnel qualified through training and
experience should install, operate, and maintain a
regulator. Before installation, make sure that there
is no damage to, or debris in the regulator. Also,
make sure that all tubing and piping are clean
and unobstructed.
Type EZL

Advertisement

Table of Contents
loading

Table of Contents