Table of Contents
Advertisement
Apply
I
I
I
-
3
-
2
N
I
I
I
-
3
-
2
N
This page displays the network settings of the specified device (IP CAM or NVR).
Available settings are explained as follows:
Item
Device List
Mode
70
Disable - When the device is offline, no action will be
performed.
Save the settings or changes to the switch.
e
t
w
o
r
k
e
t
w
o
r
k
Description
Search - Enter a string to search the device you want.
Username / Password - The default username/password will
be input if it is configured on the Topology page. However, if
the default input is not the correct username/password, enter
the correct one of the IP device instead.
Login - Click it to authenticate the username and password.
Later, current network settings related to this device will be
shown on the screen.
Change the connection mode for this device.
Static - When it is selected, you have to enter value for
network setting manually for the IP device.
DHCP - When it is selected, the IP device will be assigned with
the settings by the network's DHCP server automatically to
feature, set the group authentication information when
adding group or configure Default Username/Password in
the Topology page first.
IP Address - Enter an IPv4 address for the IP device.
Prefix Length - Specify the subnet mask for the IP
address.
Gateway - Enter the IPv4 address for the gateway.
DNS Server1/2 - Enter the IP address for primary /
secondary DNS server.
VigorSwitch P1085 User's Guide
Advertisement
Table of Contents
