Iii-6 [Network]; Iii-6-1 [Ip Address] - Draytek VigorSwitch V1281 User Manual

III-6 [Network]

III-6 [Network]
II I -6-1 [ IP Address
II I -6-1 [
Use the IP Address screen to configure the switch IP address and the default gateway
device. The gateway field specifies the IP address of the gateway (next hop) for outgoing
traffic.
The switch needs an IP address for it to be managed over the network. The factory default
IP address is 192.168.1.224. The subnet mask specifies the network number portion of an IP
address. The factory default subnet mask is 255.255.255.0.
Info
Available settings are explained as follows:
Item
Mode
IP Address
Subnet Mask
VigorSwitch V1281 User Guide
]
IP Address ]
If VigorSwitch has connected to Vigor router, it will use the IP address obtained
from the DHCP server on Vigor router. Thus, the user must type the assigned IP as
URL for accessing into the web user interface of VigorSwitch. If not, 192.168.1.224
shall be the default IP.
Description
Select the mode of network connection.
Static- Use static IPv4 address.
DHCP – Use DHCP provisioned IP address and Gateway if
feasible.
Only available when Static is selected as Mode.
Enter the IP address of your switch in dotted decimal
notation for example 192.168.1.224. If static mode is
enabled, enter IP address in this field.
Only available when Static is selected as Mode.
59