Draytek VigorSwitch P1100 Quick Start Manual

Draytek VigorSwitch P1100 Quick Start Manual

Poe 8+ 2 gigabit ports web smart switch
Hide thumbs Also See for VigorSwitch P1100:

Advertisement

V
V
P
o
E
P
o
W
W
European Community Declarations
Manufacturer:
DrayTek Corp.
Address:
No. 26, Fu Shing Road, HuKou Township, HsinChu Industrial Park, Hsin-Chu, Taiwan 303
Product:
VigorSwitch P1100
DrayTek Corp. declares that VigorSwitch P1100 is in compliance with the following essential requirements and other relevant provisions of
2004/108/EC.
The product conforms to the requirements of Electro-Magnetic Compatibility (EMC) Directive 2004/108/EC by complying with the
requirements set forth in EN55022/Class A.
The product conforms to the requirements of Low Voltage (LVD) Directive 2006/95/EC by complying with the requirements set forth in
EN60950-1.
Regulatory Information
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device may accept any interference received, including interference that may cause undesired operation.
We warrant to the original end user (purchaser) that the switch will be free from any defects in workmanship or materials for a period of one
(1) year from the date of purchase from the dealer.
GPL Notice
This DrayTek product uses software partially or completely licensed under the terms of the GNU GENERAL PUBLIC LICENSE. The author
of the software does not provide any warranty. A Limited Warranty is offered on DrayTek products. This Limited Warranty does not cover
any software applications or programs.
To download source codes please visit:
http://gplsource.draytek.com
GNU GENERAL PUBLIC LICENSE:
https://gnu.org/licenses/gpl-2.0
Version 2, June 1991
For any question, please feel free to contact DrayTek technical support at support@draytek.com for further information.
i
g
o
r
S
w
i
g
o
r
S
w
8
+
2
E
8
+
2
e
b
S
e
b
S
Quick Start Guide
Version: 1.0
Date: March 29, 2016
i
t
c
h
P
i
t
c
h
P
G
i
g
a
b
G
i
g
a
b
m
a
r
t
S
m
a
r
t
S
1
1
0
0
1
1
0
0
i
t
P
o
r
t
i
t
P
o
r
t
w
i
t
c
h
w
i
t
c
h
s
s

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VigorSwitch P1100 and is the answer not in the manual?

Questions and answers

Summary of Contents for Draytek VigorSwitch P1100

  • Page 1: Quick Start Guide

    This DrayTek product uses software partially or completely licensed under the terms of the GNU GENERAL PUBLIC LICENSE. The author of the software does not provide any warranty. A Limited Warranty is offered on DrayTek products. This Limited Warranty does not cover any software applications or programs.
  • Page 2: Package Content

     Package Content The PoE 8 + 2 Gigabit Ports Web Smart Switch is a standard switch that meets all IEEE 802.3/u/x/z Gigabit, Fast Ethernet specifications. The switch has 8 10/100/1000Mbps TP ports. The network administrator can logon the switch to monitor, configure and control each port’s activity.
  • Page 3  Descriptions of Panel Status Explanation On (Green) The device is powered on. The device is powered off. On (Green) The switch finishes system booting. Blinking The switch is powered on and starts system (Green) booting. The power is off or the system is not ready / malfunctioning.
  • Page 4: Installing Your Switch

     Installing Your Switch Power Device to This Switch and Getting 48V Power Source through Cat. 5 Cable Use a Cat. 5 twisted-pair cable to connect a PoE device to the port (1~8) of this switch. The switch will supply 48V power to PoE Device over the twisted-pair cable.

Table of Contents